Klaxon Smoke Alarm 18 980181 User Manual

Klaxalarm Terrier (18-980181)  
Battery Operated Stand Alone Fire Alarms  
Installation Instructions  
1. General  
2. Installation  
3. Operation, Testing and maintenance  
4. Tone and Sound Level Adjustment  
5. Connecting External Manual Call Points  
6. Interlinking Multiple Units  
 
4. Tone and Sound Level Adjustment  
The Terrier model incorporates 3 user selectable tones. In order to change the tone  
setting the front cover of the electronic sounder within the Klaxalarm must be  
removed by undoing the two fixing screws. The tones are selected as follows:  
Tone  
Black Lead  
Jumper  
Continuous  
Warble  
Alternating  
Cont (-) Terminal  
Tone (-) Terminal  
Tone (-) Terminal  
Leave in factory setting  
Leave in factory setting  
Change position  
The sound level can be reduced by changing the setting of the potentiometer on  
the siren PCB.  
5. Connecting External Manual Call Points  
NOTE: For correct operation with external manual call points it is essential to use  
a call point with a NORMALLY CLOSED CONTACT (i.e. an opening contact  
or changeover contact). We strongly recommend the use of Klaxon Manual Call  
Point Model No. 17-970073 to ensure correct operation.  
The normally closed terminals of the call point should be connected to terminals  
A and B in the Klaxalarm using two core cable. The factory fitted link between  
the terminals A and B in the Klaxalarm must be removed. Several normally  
closed manual call points can be connected in a series loop between these  
terminals if desired.  
 
6. Interlinking Multiple Units  
Multiple units can be interlinked and/or connected to external manual call points  
using three core cable as in the example wiring diagram below.  
NOTE: For correct operation with external manual call points it is essential to use  
a call point with a NORMALLY CLOSED CONTACT (i.e. opening contact or  
changeover contact). We strongly recommend the use of Klaxon Manual Call  
Point Model No. 17-970073 to ensure correct operation.  
If an external call point is not required a direct connection must be made from  
terminal C in the first unit to terminal B in the next unit and so on. Standard  
telecom type multi-core cable can be used.  
7. Contacting Klaxon  
Klaxon Signals Ltd  
Wrigley St  
Oldham  
England  
OL4 1HW  
Technical Helpline: +44 (0) 161 287 4029  
Sales Hotline:  
Fax:  
E-mail:  
Web:  
+44 (0) 161 287 5555  
+44 (0) 161 287 5511  
 

Intellinet Network Solutions Network Router 503693 User Manual
ION TV Converter Box VIDEO 2 GO User Manual
JVC Cassette Player KS F360R User Manual
JVC CD Player KD ABT22 User Manual
JVC Flat Panel Television PD 42X795 User Manual
JVC Projection Television HD 52G586 User Manual
JVC VCR HR DD949EE User Manual
JVC Work Light KW XC828 User Manual
KitchenAid Range KERA807P User Manual
KitchenAid Ventilation Hood KHTU105L User Manual