Klaxon Network Card 102325 User Manual

Installation Instructions  
Flashguard LED Flasher Module  
To Flashguard Xtra  
1.  
Straighten the two LEDs by gently bending them in to  
the upright position.  
2.  
Peel the backing off the adhesive mounting brackets  
provided and attach them to the inside of the cover as  
shown below.  
6 cm  
3.  
4.  
Connect the unit to a suitable 12V supply, observing  
polarity. The two LEDs will now flash alternately.  
Slot the PCB into the mounting brackets with the LEDs  
pointing towards the lens. Bend the LEDs into position if  
required.  
5.  
Fix the unit to the wall in the same way as an ordinary  
simulated unit.  
Wrigley Street, Oldham, Lancashire. OL4 1HW  
Tel +44 (0)161 287 5555 Fax +44 (0)161 287 5511  
 

Inglis Home Appliances Dishwasher IRD6710 User Manual
Insignia Network Card NS GWII1106 User Manual
Intel Computer Hardware 87C196CA User Manual
IOGear Mouse 1600DPI User Manual
Ionic Pro Air Cleaner TP101M User Manual
Jenn Air Refrigerator W10329370A User Manual
JVC Computer Monitor DT V20L3GZ User Manual
JVC Home Theater System SP THD51C User Manual
Keating Of Chicago Fryer 20 BB Gas User Manual
Konica Minolta Film Camera CS 200 User Manual